Authorized Dealer and Distributor for IMPACT BY HONEYWELL PLUMBING VALVES
Proven quality that’s built to last, for years of reliable performance
Presenting a comprehensive range that includes Forged Brass Ball Valves, Pressure Reducing Valves, Non-Return Valves, Dual Plate Check Valves, Manual and Motorized Butterfly Valves, Sluice Valves, and Y Type Strainers. For each valve type, the IMPACT by Honeywell range boasts a wide range of sizes, designs and nominal pressure capabilities, for consistent performance across requirements.
BUTTERFLY VALVE (WAFER TYPE) WITH ELECTRICAL ACTUATOR BFM-IMP-PN16
An electrical actuator operated Butterfly Valve, built with cast iron (up to DN250) and ductile iron (DN300 and above), with a DI/SS disc, this valve comes with an IP 67 rating, for outdoor application.
- ON/OFF and Modulating type actuation control
- Anti-condensation space heater available in the actuator
- Compatible to sandwich between flanges as per IS 1538 / ISO 7005-2
- Compatible with B.M.S (Building Management System)
- Input Voltage – 230+/-10% VAC 50/60 Hz power supply
IMPACT by Honeywell BFH-IMP-PN16 Manual Operation Butterfly Valves (Wafer Type) feature a Cast Iron / Ductile Iron body, DI/SS Disc, and are suitable for water application. They have aNominal Pressure of PN16.
- Design Standard IS 13095
- Wafer type design
- Body Material: Cast Iron (up to DN250) / Ductile Iron (above DN250)
- Quarter Turn Hand Lever
BUTTERFLY VALVE (WAFER TYPE) WITH GEAR, PN16
Design Standard IS 13095 / BS5155. Wafer Type. Quarter Turn Gear Operated Stainless steel Disc which is accurately guided between the stem . No VisibleLeakage
- Design Standard IS 13095 / BS5155. Wafer Type
- Quarter Turn Gear Operated
- Stainless Steel Disc
- No Visible Leakage
- Renewable body liner (EPDM) for size upto 150 mm and integrally molded liner for size 200mm and above.
- Compatible to sandwich between flanges as per ISO7005-1 (GB/T 9113)/IS 1538 (B16.5#150)1092-2.
Non – Return Valve (Swing type), PN1.0
IMPACT by Honeywell NRV-IMP-PN10 Non-Return Valves (Swing Type) feature a Cast Iron construction and the valve can be installed in both horizontal & vertical orientations. Suitable for Nominal Pressure of PN 1.0.
IMPACT by Honeywell NRV-IMP-PN10 Non-Return Valves (Swing Type) feature a Cast Iron construction and the valve can be installed in both horizontal & vertical orientations. Suitable for Nominal Pressure of PN 1.0.
IMPACT by Honeywell NRV-IMP-PN16 Non-Return Valves (Swing Type) feature a Cast Iron construction and can be installed in both horizontal & vertical orientation. Suitable for Nominal Pressure of PN 1.6.
- Design Standard IS 5312-1 : 2004
- Renewable Seat Rubber Flap
- Flanged Ends to IS 1538
- Seating Design – Swing type
- Can be installed in Horizontal / Vertical orientation
Honeywell Pressure Reducing Valves offer high quality design and consistent performance, with easy installation. By balancing and optimizing inlet pressure, they prevent damage to water systems, and offer years of trouble free service.
- Screwed Female Ends to ISO 228
- Piston-operated, compact construction, easy to install
- Outlet pressure adjustable with adjusting screw
- Facility provided to install a Pressure Gauge to gauge the critically relevant Outlet Pressure
- Can be installed in Horizontal, Vertical, or inclined orientations.
The Honeywell Dual Plate Check Valves feature a Cast Iron / Ductile Iron body with DI/SS Disc. They are designed stronger, lighter and smaller, compared to other Check valves, and are suitable for water application. They have a Nominal Pressure of PN16.
- Cast Iron / Ductile Iron Body with DI/SS Disc
- Wafer Type Design, to take lesser space than the conventional Check Valve.
- Being cylindrical body, stresses are uniformly distributed
- End connections are designed to suit flanges drilled to ISO: 7005-2, IS 1538, ANSI B Class-125, Class-150, Table ‘D’ and Table ‘E’
IMPACT by Honeywell SLV-IMP-PN16 Sluice Valves feature a Cast iron body with Bronze Seat Rings, bolted bonnet, and non-rising stem. They are handwheel operated and are suitable for water applications. Suitable for Nominal Pressure of PN 1.6.
- Design Standard IS 14846
- Bolted Bonnet, Non-Rising Stem
- Cast Iron Body with Bronze Seat Rings
- Handwheel Operated
- No visible leakage
- Flange Ends as per IS 1538
IMPACT by Honeywell SLV-IMP-PN10 Sluice Valves feature a Cast iron body with Bronze Seat Rings, bolted bonnet, and non-rising stem. They are handwheel operated and are suitable for water applications. Suitable for Nominal Pressure of PN 1.0.
- Design Standard IS 14846
- Bolted Bonnet, Non-Rising Stem
- Cast Iron Body with Bronze Seat Rings
- Handwheel Operated
- No visible leakage
- Flange Ends as per IS 1538
The IMPACT by Honeywell Forged Brass Ball Valves feature a full port design, BSP internal threads, and a chrome plated brass ball. They are designed to operate with a nominal pressure of PN25.
- Full Bore, Two-Piece Design
- Quarter Turn, Lever Operated
- Chrome Plated Ball
- Screwed Female Ends to BSP
Available as variants with Flanged or Screwed end connections, IMPACT by Honeywell Y-Type Strainers ensure plumbing is protected from debris and other foreign particles. Featuring a Cast Iron body, they are suitable for water applications.
- Cast Iron Body with Powdercoating
- Screwed Female ends to BSP : IS 1538 / ISO7005-2 Standard
- Non- Corrodible SS304 perforated Sheet Screen
- Fine finish and Smooth Contour to minimize pressure drop inside the strainer
- Large Screening area makes the strainer highly efficient in performance
IMPACT by Honeywell Y-Type Strainers ensure plumbing is protected from debris and other foreign particles. Featuring a Cast Iron body, they are suitable for water applications.
- Ductile iron body with Powder Coating
- Flange end : IS 1538 / ISO7005-2 Standard
- Non Corrodible SS304 perforated Sheet Screen
- Fine finish and Smooth Contour to minimize pressure drop inside the strainer
- Large Screening area makes the strainer highly efficient in performance