12 Type Different Tool

Hex 12 Type Different Tool - Crimping Tool - Finishing: Size: CAP: 0.5 to 400 sq.mm

Material: 
Finishing: 
Size: CAP: 0.5 to 400 sq.mm

5 Type Different Jack

Hex 5 Type Different Jack - Crimping Tool - Finishing: Size: CAP: 10 to 1000 sq.mm

Material: 
Finishing: 
Size: CAP: 10 to 1000 sq.mm

Foot Hydraulic Crimping Tool

Hex Foot Hydraulic Crimping Tool - Cable Accessories - Finishing: Size: CAP: 10 to 1000 sq.mm

Material: 
Finishing: 
Size: CAP: 10 to 1000 sq.mm

A crimping tool is only as good as the match between the tool’s capacity and the cable you’re actually working with — use a hand tool outside its rated range and the crimp won’t hold properly, which is a safety problem, not just a convenience one. eNarayan Elex stocks three categories of HEX crimping tool, built for three different cable-size ranges and work settings.

Hand Manual Crimping Tool is the everyday tool for smaller cable sizes, covering 0.5 to 400 sq.mm. It’s lever-operated by hand, with no external power source needed, which makes it the practical choice for panel wiring, control cabling and general electrical work where you’re crimping lugs and ferrules one at a time without needing serious mechanical force. eNarayan stocks 12 different tool types in this manual range, covering different lug and connector profiles.

Hand Hydraulic Crimping Tool steps up to a 10 to 1000 sq.mm range — the heavier cable sizes used in power distribution and larger industrial wiring. The hydraulic mechanism multiplies the hand force applied, which is what makes crimping a thick copper or aluminium lug possible without excessive physical effort. These tools come with interchangeable dies (jacks) — eNarayan stocks 5 jack types — so one tool body can handle several lug sizes and profiles rather than needing a separate tool for each.

Foot Hydraulic Crimping Tool covers the same 10 to 1000 sq.mm range as the hand hydraulic version, but the hydraulic pressure is generated by a foot pedal instead of a hand pump. That frees both hands to hold and position the cable and lug, which matters most on site work and larger-diameter crimps where keeping the joint steady while pumping by hand gets awkward — foot-operated models are common on transmission and distribution line work for exactly this reason.

Picking between hand and foot hydraulic: if you’re working solo and the cable is manageable one-handed, hand hydraulic is simpler to carry and use. If you need both hands free to hold a heavier cable steady while crimping, foot hydraulic is the better fit.

eNarayan Elex also supplies the lugs, glands and connectors these tools are used with — see Wires and Cables for cable stock and browse the wider Cable Accessories range for the rest of the accessory line, including Raychem RPG’s Rubber Insulating Gloves and Insulating Mats for safe working around the panels these cables feed. Contact eNarayan Elex for pricing and bulk orders.

Frequently Asked Questions

What types of crimping tools does eNarayan stock from Hex?

Three types: the Hand Manual Crimping Tool (12 different tool types), the Hand Hydraulic Crimping Tool (5 different jack types), and the Foot Hydraulic Crimping Tool.

What cable size range does the Hand Manual Crimping Tool cover?

It has a crimping capacity (CAP) of 0.5 to 400 sq.mm, making it suitable for a wide range of lug and ferrule crimping jobs on smaller to mid-size conductors.

What is the crimping capacity of the Hydraulic Crimping Tools?

Both the Hand Hydraulic and Foot Hydraulic crimping tools from Hex offer a crimping capacity (CAP) of 10 to 1000 sq.mm, for heavier-gauge cable terminations than the manual tool handles.

When would I choose a foot hydraulic tool over a hand hydraulic tool?

The Foot Hydraulic Crimping Tool is operated by foot pressure rather than hand force, which is typically preferred for larger, higher-force crimps on heavy-gauge cable (up to 1000 sq.mm) where repeated hand-pumping would be tiring.

Does eNarayan also supply the lugs and glands these tools are used with?

Yes — eNarayan stocks Hex lugs, glands and connectors alongside its crimping tool range, so cable termination hardware and the tools to install them can be sourced together.

How can I get pricing on Hex crimping tools?

Contact eNarayan's sales team at sales@enarayan.com or +91 991 234 3384 for current pricing and stock availability.